LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1050 (Engine Lubrication System) >> Oil Cooler >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the engine oil.
  2. Drain the engine coolant.
  3. Remove the oil filter. Refer to REMOVAL AND INSTALLATION .
  4. Remove the wheel and tire assembly using power tool.
  5. Remove the splash shield.
  6. Disconnect the coolant hoses from the oil cooler.
    CAUTION: Do not spill coolant on the drive belt.
  7. Remove the oil cooler from the upper oil pan.
scientia non olet · About LEMON Manuals