LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1049 (Engine Mechanical) >> Camshaft >> Removal and Installation >> Inspection After Removal >> Camshaft Cam Lobe Height

Camshaft Cam Lobe Height

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure camshaft cam lobe height as shown. Refer to CAMSHAFT AND CAMSHAFT BEARING .
  2. If wear has reduced the lobe height below specifications, replace the camshaft.
    Fig 1: Measuring Camshaft Cam Lobe Height
    G00779242Courtesy of NISSAN MOTOR CO., U.S.A.