Removal and Installation: Removal
WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the engine coolant. DRAINING ENGINE COOLANT .
- Remove the air duct with air cleaner assembly. Refer to AIR CLEANER AND AIR DUCT .
- Disconnect A/T oil cooler hoses (if equipped).
- Install a blind plug to avoid leakage of A/T oil.
- Disconnect the radiator upper hose, lower hose, and mounting bracket.
- Remove the radiator and cooling fan assembly
CAUTION:
- Do not damage or scratch radiator core when removing.