Removal and Installation: Removal
WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Drain engine coolant. Refer to DRAINING ENGINE COOLANT .
- Remove the air duct and air cleaner assembly.
- Disconnect the A/T oil cooler hoses (if equipped) and install a blind plug in the hoses to prevent A/T oil loss.
- Disconnect the upper and lower radiator hoses and mounting bracket.
- Remove the radiator and radiator fan assembly as one unit.
CAUTION:
Do not damage or scratch the radiator core when removing.