LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1040 (Engine Mechanical - QG18DE) >> Cylinder Head >> Inspection after Disassembly >> Valve Spring >> Squareness

Valve Spring: Squareness

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure dimension "S".
    1. Out-of-square "S" : Less than 1.75 mm (0.0689 in) 
    Fig 1: Measuring Valve Spring Dimension (Out-Of-Square)
    G00774066Courtesy of NISSAN MOTOR CO., U.S.A.
  2. If it exceeds the limit, replace the spring.