LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> 350Z Standard >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Turn Signal And Hazard Warning Lamps >> Inspection For Power Supply And Ground Circuit >> Consult-II Function >> Data Monitor >> Operation Procedure

Operation Procedure

  1. Touch "FLASHER" on "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.
    OPERATION PROCEDURE CHART

    All signals Monitors all the signals.
    Selection from menu Selects and monitors the individual signal.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
  6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals