Power Supply And Ground Circuit

Power is supplied at all times

through 10A fuse [No.19, located in the fuse block (J/B)]
to triple meter terminal 2,
to combination meter terminal 24 and
to unified meter and A/C amp. terminal 21.

With the ignition switch in the ON or START position, power is supplied

through 10A fuse [No.14, located in the fuse block (J/B)]
to triple meter terminal 3 and
to combination meter terminal 23, and
through 10A fuse [No.12, located in the fuse block (J/B)]
to unified meter and A/C amp. terminal 22.

With the ignition switch in the ACC or ON position, power is supplied

through 15A fuse [No.10, located in the fuse block (J/B)] and
through 15A fuse [No.11, located in the fuse block (J/B)]
to unified meter and A/C amp. terminal 46.

Ground is supplied

to triple meter terminal 1,
to combination meter terminals 10, 11 and 12 and
to unified meter and A/C amp. terminals 29 and 30
through body grounds M30 and M66.