LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> 350Z Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Switch >> Combination Switch >> Data Monitor >> Operation Procedure

Operation Procedure

  1. Touch "COMB SW" on "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on "DATA MONITOR" screen.
    DATA MONITOR

    All signals Monitors all the signals.
    Selection from menu Selects and monitors individual signal.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the signals will be monitored.
  6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals