LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2000 >> Sentra CA >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Pads >> Installation (Altima, Maxima & Sentra)

Installation (Altima, Maxima & Sentra)

  1. Clean area around pin bolts and piston boot. DO NOT damage piston boot. Retract piston into cylinder body by turning it clockwise. Apply silicone brake grease to caliper sliding surfaces and pad contact areas on mounting support.
  2. Install pads, aligning piston concave to pad convex. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals