LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2000 >> Sentra CA >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (Frontier, Pathfinder & Xterra 2WD)

Removal & Installation (Frontier, Pathfinder & Xterra 2WD)

  1. Raise and support vehicle. Remove wheel assembly. Remove caliper, but DO NOT disconnect hydraulic line. Wire caliper aside. See FRONT BRAKE CALIPER . See Figure
  2. Remove hub dust cover, cotter pin, wheel bearing lock nut cap and lock nut. Remove hub and rotor assembly. Separate rotor from hub. To install, reverse removal procedure.