LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2000 >> Sentra CA >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Pads >> Installation

Front Brake Pads: Installation

  1. Clean area around piston boot and guide pins. Seat piston and install inner pad. Apply brake grease to pad retainer points on caliper assembly. Install outer pad and shims.
  2. Install pad retainers. Rotate caliper body down into original position. Install lower pin bolt. Tighten bolts to specification, and depress brake pedal several times to seat pads. See TORQUE SPECIFICATIONS .