Fuel Gauge Sending Unit
Remove fuel gauge sending unit from fuel tank. Using DVOM, measure resistance between terminals No. 2 and 5 at appropriate sending unit connector terminals. See WIRING DIAGRAMS . See FUEL GAUGE SENDING UNIT RESISTANCE table. Replace fuel gauge sending unit if resistance values are not as specified.
FUEL GAUGE SENDING UNIT RESISTANCE
| Float Position | Ohms | |||
|---|---|---|---|---|
| Empty (1) | 80-83 | |||
| Half | 31.5-33.5 | |||
| Full (1) | 4.5-5.5 | |||
|
||||