Synchronizer Ring, M/T

CLEARANCE BETWEEN BAULK RING AND GEAR
Standard Wear Limit mm (in)
1st & 2nd 1.0 - 1.35 0.7
3rd & 4th 1.0 - 1.35 0.7
5th 1.0 - 1.35 0.7

AVAILABLE CHECK PLUGS
REVERSE CHECK PLUG
Reverse Check Turning Torque (At Striking Rod) 4.9 - 7.4 Nm

AVAILABLE SNAP RINGS
Input Shaft Front Bearing
Allowable Clearance 0 - 0.1 mm