LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1999 >> Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Testing and Inspection >> Reading and Clearing Diagnostic Trouble Codes >> With CONSULT >> With Consult

With Consult

1. Turn ignition switch OFF.




2. Connect "CONSULT" to data link connector for CONSULT. (Data link connector for CONSULT is located behind the fuse box cover.)
3. Turn ignition switch ON.




4. Touch "START".




5. Touch "ENGINE".







6. Perform each diagnostic test mode according to each service procedure.
For further information, see the CONSULT Operation Manual.
This sample shows the display when using the UE990 program card. Screen differs in accordance with the program card used.




ENGINE CONTROL COMPONENT PARTS/CONTROL SYSTEMS APPLICATION
scientia non olet · About LEMON Manuals