Front

REMOVAL

WARNING: Clean brake pads with a vacuum dust collector to minimize the hazard of airborne particles or other materials.

CAUTION: Suspend caliper assembly with wire so as not to stretch brake hose.

Torque Member And Fixing Bolt Removal:

Remove torque member fixing bolts and connecting bolt.
It is not necessary to remove connecting bolt except for disassembly or replacement of caliper assembly. In this case, suspend caliper assembly with wire so as not to stretch brake hose.

INSTALLATION

CAUTION: Refill with new brake fluid DOT 3. Never reuse drained brake fluid.

Caliper Hose Installation:

1. Install caliper assembly.
2. Install brake hose to caliper securely.
3. Install all parts and secure all bolts.
4. Bleed air. Service and Repair