4-Door Sedan

4 - Door Sedan

CAUTION:
- Do not disassemble buckle or seat belt assembly.
- Replace anchor bolts if they are deformed or worn out.
- Never oil tongue and buckle.
- If any component of seat belt assembly is questionable, do not repair. Replace the seat belt assembly.
- If webbing is cut, frayed, or damaged, replace seat belt assembly.
- When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.
- After any collision, inspect all seat belt assemblies, including retractors and other attached hardware.

REMOVAL
Remove rear seat cushion.

Rear Seat Belt:

1. Remove floor anchor bolt.
2. Remove seat belt guide cover.
Remove rear pillar garnish.
3. Remove pillar anchor bolt.
Remove trunk side finisher.
4. Remove retractor bolt.
5. Remove retractor.