LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1998 >> 200SX SE-R, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Pads >> Installation

Front Brake Pads: Installation

  1. Clean piston and area around lock and guide pins. Install inner pad. Seat piston by placing lever through opening in caliper body and pushing piston into bore. Apply brake grease to pad retainer points on caliper assembly. Install outer pad and shims.
  2. Install pad retainers. Rotate caliper body down into original position. Install lower lock pin. Tighten bolts to specification, and depress brake pedal several times to seat pads. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals