LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1998 >> 200SX SE-R, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments >> Stoplight Switch & Automatic Speed Control Device Switch

Stoplight Switch & Automatic Speed Control Device Switch

  1. Both switches are located below dash panel, at brake pedal bracket. Adjust brake pedal height. See BRAKE PEDAL HEIGHT & FREE PLAY.
  2. Check clearance and position of switches. Clearance between brake pedal stopper rubber and threaded end of switch should be 0.01-0.04" (0.3-1.0 mm). To adjust, loosen lock nut and turn switch body. After adjustment, tighten lock nut.
scientia non olet · About LEMON Manuals