Ball Joint

SERVICE SPECIFICATIONS
Swinging force "A" [1]: 7.8 - 57.9 N (1.8 - 13.0 lbs.)
Turning torque "B": 0.5 - 3.4 Nm (4.3 - 30.4 inch lbs.)
Vertical end play "C": O mm (O inch)

[1]: Measuring point: cotter pin hole of ball stud.

TIGHTENING SPECIFICATIONS
Compression Rod Clamp Bolt : 78 - 98 Nm (58 - 72 ft. lbs.)
Connecting Rod Nut : 16 - 22 Nm (12 - 16 ft. lbs.)
Crossmember Mounting Bolt : 103 - 123 Nm (76 - 90 ft. lbs.)
Lower Ball Joint Castle Nut: 59 - 74 Nm (43 - 54 ft. lbs.)