Gear, M/T

Baulk Ring And Gear Clearance
1st & 2nd:
Standard 1.0 - 1.35 mm (0.0394 - 0.0531 inch)
Wear Limit 0.7 mm (0.028 inch)
3rd & 4th:
Standard 1.0 - 1.35 mm (0.0394 - 0.0531 inch)
Wear Limit 0.7 mm (0.028 inch)
5th:
Standard 1.0 - 1.35 mm (0.0394 - 0.0531 inch)
Wear Limit 0.7 mm (0.028 inch)
End Play:
Main Gear:
1st 0.18 - 0.31 mm (0.0071 - 0.0122 inch)
2nd 0.20 - 0.30 mm (0.0079 - 0.0118 inch)
3rd 0.20 - 0.30 mm (0.0079 - 0.0118 inch)
4th 0.20 - 0.30 mm (0.0079 - 0.0118 inch)
Input Gear:
5th 0.18 - 0.31 mm (0.0071 - 0.0122 inch)