Pressure Plate

SERVICE SPECIFICATIONS
Diaphragm Spring Toe Height: 30.5 - 32.5 mm (1.201 - 1.280 inch)
Uneven Limit Of Diaphragm Spring Toe Height: 0.7 mm (0.028 inch)

TIGHTENING SPECIFICATIONS
- Tighten bolts in the numerical order shown.
1st Pass: 10 - 20 Nm (7.2 - 14 ft. lbs.)
2nd Pass: 22 - 29 Nm (16 - 22 ft. lbs.)