4-Door Sedan

CAUTION:
- Do not disassemble buckle or seat belt assembly.
- Replace anchor bolts if they are deformed or worn out.
- Never oil tongue and buckle.
- If any component of seat belt assembly is questionable, do not repair. Replace the seat belt assembly.
- If webbing is cut, frayed, or damaged, replace seat belt assembly.
- When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.
- After any collision, inspect all seat belt assemblies, including retractors and other attached hardware.

Rear Seat Belt:

REMOVAL
Remove rear seat cushion.
1. Remove floor anchor bolt.
2. Remove seat belt guide cover.
Remove rear pillar garnish.
3. Remove pillar anchor bolt.
Remove trunk side finisher.
4. Remove retractor bolt.
5. Remove retractor.