2-Door Coupe

CAUTION:
- Do not disassemble buckle or seat belt assembly.
- Replace anchor bolts if they are deformed or worn out.
- Never oil tongue and buckle.
- If any component of seat belt assembly is questionable, do not repair. Replace the seat belt assembly.
- If webbing is cut, frayed, or damaged, replace seat belt assembly.
- When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.
- After any collision, inspect all seat belt assemblies, including retractors and other attached hardware.

2-Door Coupe:

REMOVAL
Remove front seat.
1. Remove buckle.
2. Remove floor anchor bolt.
Remove rear side finisher.
3. Remove pillar anchor cover and anchor bolt.
4. Remove guide plate bolts.
5. Remove retractor bolts.
Remove retractor.