Fuel Gauge Sending Unit

Remove fuel gauge sending unit from fuel tank. Measure resistance between sending unit connector terminals No. 2 and 3 (No. 1 and 3 on 2.0L models). See Fig 1 or Fig 2 . If resistance values are not as specified replace sending unit. See FUEL GAUGE SENDING UNIT RESISTANCE table.

FUEL GAUGE SENDING UNIT RESISTANCE

Float Position	Ohms
Empty	80-83
Half Travel	31.5-33.5
Full	4.5-5.5

Fig 1: Identifying Fuel Gauge Sending Unit Terminals (1.6L Engine)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Identifying Fuel Gauge Sending Unit Terminals (2.0L Engine)

Courtesy of NISSAN MOTOR CO., U.S.A.