Torsion Bar

TIGHTENING SPECIFICATIONS
Anchor Arm Pivot Nut 30 - 40 Nm (22 - 30 ft. lbs.)
Front Spring At Lower Link:
Large Nut 89 - 118 Nm (66 - 87 ft. lbs.)
Small Nut 45 - 60 Nm (33 - 44 ft. lbs.)

SERVICE SPECIFICATIONS
Spring Diameter 26.0 mm (1.024 inch)
Spring Constant 25.7 N/mm (146.7 lbs./inch)
Spring Length 1205 mm (47.44 inch)