Dimensions

DIMENSIONS
Drive Plate Thickness:
Standard Value 1.52 - 1.67 mm (0.0598 - 0.0657 inch)
Wear Limit 1.80 mm (0.0709 inch)
Retaining Plate And Snap Ring Clearance:
Standard Value 0.7 - 1.1 mm (0.028 - 0.043 inch)
Wear Limit 2.3 mm (0.091 inch)
Seal Ring-To-Groove Clearance:
Standard Value 0.10 - 0.25 mm (0.0039 - 0.0098 inch)
Wear Limit 0.25 mm (0.0098 inch)

GENERAL
Number Of Drive Plates 6
Number Of Driven Plates 6