Front Wheel Bearing Nut Torque

SERVICE SPECIFICATIONS
Axial End Play 0 mm (0 inch)
Bearing Preload (Starting Torque) [1]:
New Grease Seal 9.8 - 28.4 N (2.2 - 6.4 lbs.)
Used Grease Seal 9.8 - 23.5 N (2.2 - 5.3 lbs.)

TIGHTENING SPECIFICATIONS
Bearing Lock Nut:
Initial 34 - 39 Nm (25 - 29 ft. lbs.)
Return Angle 45 - 60°

[1]: As measured at wheel hub bolt.