Fuel Pump: Testing and Inspection
COMPONENT INSPECTIONFuel Pump
1. Disconnect fuel pump harness connector.
2. Check resistance between terminals (5) and (6).
Resistance: 0.2 - 5.0 ohms at 25°C (77°F)
If NG, replace fuel pump.
Fuel Pump
1. Disconnect fuel pump harness connector.
2. Check resistance between terminals (5) and (6).
Resistance: 0.2 - 5.0 ohms at 25°C (77°F)
If NG, replace fuel pump.