Steering Angle

1. Set wheels in straight-ahead position. Then move vehicle forward until front wheels rest properly on turning radius gauge.
2. Rotate steering wheel all the way right and left; measure turning angle.
On power steering models, turn steering wheel to full lock and apply force (at circumference of steering wheel) of 98 - 147 N (22 - 33 lbs.) with engine at idle.

CAUTION: Do not hold the steering wheel at full lock for more than 15 seconds.





3. Adjust stopper bolt if necessary. Standard length "L1": 20 mm (0.79 inch)
4. Wheel turning angle (Full turn): Specifications