P0740

With consult:




DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
After the repair, perform the following procedure to confirm the malfunction is eliminated.
1. Turn ignition switch "ON".




2. Select "SELF-DIAG RESULTS" mode with CONSULT.
3. Drive vehicle in D1-D2-D3-D4-D4 lock-up position.

With GST:




DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
After the repair, perform the following procedure to confirm the malfunction is eliminated.
1. Turn ignition switch "ON".




2. Select "MODE 3" with Generic Scan Tool (GST).
3. Drive vehicle in D1-D2-D3-D4-D4 lock-up position.

Without Consult:




DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
After the repair, perform the following procedure to confirm the malfunction is eliminated.
1. Turn ignition switch "ON".




2. Perform self-diagnosis.
3. Drive vehicle in D1-D2-D3-D4-D4 lock-up position.




Diagnostic Procedure