P0725

With Consult:




DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
After the repair, perform the following procedure to confirm the malfunction is eliminated.
1. Start engine.




2. Select "SELF-DIAG RESULTS" mode with CONSULT
3. Drive vehicle under the following conditions: Shift lever in D, vehicle speed higher than 10 km/h (6 MPH), throttle opening greater than 1/8 of the full throttle position and driving for more than 10 seconds.

With GST:




DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
After the repair, perform the following procedure to confirm the malfunction is eliminated.
1. Start engine.
2. Drive vehicle under the following conditions: Shift lever in D, vehicle speed higher than 10km/h (6 MPH), throttle opening greater than 1/8 of the full throttle position and driving for more than 10 seconds.




3. Select "MODE 3" with Generic Scan Tool (GST).

Without Consult:




DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
After the repair, perform the following procedure to confirm the malfunction is eliminated.
1. Start engine.
2. Drive vehicle under the following conditions: Shift lever in D, vehicle speed higher than 10 km/h (6 MPH), throttle opening greater than 1/8 of the full throttle position and driving for more than 10 seconds.




3. Perform self-diagnosis.




Diagnostic Procedure: