Drive/Propeller Shaft: Labor Times

	Standard Hours	Manufacturer Warranty Hours	Skill Level	Notes
Replace
Front Axle	1.2	0.4	B
Note
To R&R Universal Joints, Add
Each	0.5	0.3	B
To R&R Center Bearing, Add	0.4	0.3	B
To R&R Slip Yoke	0.4	0.3	B
Rear Axle
With Limited Slip	0.7	0.4	B
Note
To R&R Universal Joints, Add
Each	0.5	0.3	B
To R&R Center Bearing, Add	0.4	0.3	B
To R&R Slip Yoke	0.4	0.3	B
Without Limited Slip	0.7	0.4	B
Note
To R&R Universal Joints, Add
Each	0.5	0.3	B
To R&R Center Bearing, Add	0.4	0.3	B
To R&R Slip Yoke	0.4	0.3	B