Service Specifications
Hitachi - S114-528A, Reduction Gear<ns95truck_smel-006>
| System Voltage | 12 Volts (V) |
| Minimum Diameter of Commutator | > 1.26 Inch (in) |
| Minimum Length of Brush | 0.43 Inch (in) |
| Brush Spring Tension | 4.0-4.9 Pound-Force (lbf) |
| Clearance of Bearing Metal and Armature Shaft | < 0.008 Inch (in) |
| Clearance Between Pinion Front Edge and Pinion Stopper | 0.012 - 0.059 Inch (in) |