LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1995 >> 200SX SE-R, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Pads >> Installation

Rear Brake Pads: Installation

  1. To install, reverse removal procedure. Clean area around pin bolts and piston end. DO NOT  damage piston boot. Retract piston into cylinder body by turning it clockwise.
  2. Apply silicone brake grease to caliper sliding surfaces and pad contact area on mounting support.
scientia non olet · About LEMON Manuals