Manual Transmission
Reduction Gear, Manual Transmission, Federal| Non-California Models | California Models | |
| Model Number | M0T80281ZC | M2T42983ZC |
| Type | Mitsubishi | Mitsubishi |
| System Voltage | 12 Volts (V) | 12 Volts (V) |
| Minimum Diameter of Commutator | 1.134 Inch (in) | 1.236 Inch (in) |
| Minimum Length of Brush | 0.276 Inch (in) | 0.453 Inch (in) |
| Brush Spring Tension | 2.7-5.3 Pound-Force (lbf) | 3.1-5.7 Pound-Force (lbf) |
| Clearance of Bearing Metal and Armature Shaft | 0.0078 Inch (in) Note: Maximum | 0.0078 Inch (in) Note: Maximum |
| Clearance Between Pinion Front Edge and Pinion Stopper | 0.019-0.079 Inch (in) | 0.019-0.079 Inch (in) |