Component Inspection
COMPONENT INSPECTION
1. Disconnect IACV-FICD solenoid valve harness connector.
2. check resistance between terminals 1 and 5.
Resistance: 75 - 125 ohms [at 25°C (77°F)]
If NG, replace the solenoid valve.
COMPONENT INSPECTION
1. Disconnect IACV-FICD solenoid valve harness connector.
2. check resistance between terminals 1 and 5.
Resistance: 75 - 125 ohms [at 25°C (77°F)]
If NG, replace the solenoid valve.