Warning Lamps

If equipped with theft warning system, power is supplied at all times:
^ through 7.5 A fuse (No. (24) located in the fuse block [HEC])
^ to combination meter terminal (37) for the security lamp.
Ground for the security lamp is supplied when the system is activated:
^ to combination meter terminal (36)
^ from terminal (2) of the smart entrance control unit.
With the ignition switch in the ON or START position, power is supplied:
^ through 1O A fuse (No. (8) located in the fuse block [HEC])
^ to combination meter terminal (10) [(34]) for the air bag warning lamp
^ to combination meter terminal (22) and ([14])
^ to combination meter terminal (41).
Ground is supplied for each of the warning lamps through different terminals of the combination meter.

Terminal numbers in [] are for models without tachometer.