Connecting Rod, Engine

Crankshaft:
Standard Journal Diameter:
Main Bearing [05]
Crank Pin [11]

[05] -- Grade 0, 1.9668-1.9671 inch; grade 1, 1.9665-1.9668 inch; grade 2, 1.9661-1.9665 inch.
[11] -- Grade 0, 1.5735-1.5738 inch; grade 1, 1.5733-1.5735 inch; grade 2, 1.5731-1.5733 inch.

NOTE: All Measurements are given in inches unless otherwise specified.