Without Scan Tool

USING THE WARNING LAMP

Self-diagnosis results can be also read by using the "AIR BAG" warning lamp.






The "Air bag" warning lamp operates as shown below:









Problem codes are displayed in present diagnosis mode (self-diagnosis result 1). The problem code last indicated is displayed in initial diagnosis mode (self-diagnosis result 2).

After the malfunctioning parts have been repaired and the system is returned to the user mode, the present diagnosis mode information, displayed as self-diagnosis results, is automatically cleared from memory.

- After repairing malfunctioning part, attempt to clear self-diagnosis results from memory.

- If a malfunctioning part is not completely repaired, information stored in memory will not be cleared.









Self-diagnosis results in present- and initial-diagnosis modes can be identified by number of flashes.






Flash Code Descriptions and Repair Procedures