Ignition Control Module: Specifications

Resistance Between Terminals:
a (+ lead) & b (- lead) no continuity
a (+ lead) & c (- lead) no continuity
b (+ lead) & a (- lead) some continuity
b (+ lead) & c (- lead) some continuity
c (+ lead) & a (- lead) some continuity
c (+ lead) & b (- lead) some continuity

NOTE: "SOME CONTINUITY" is defined as any resistance between zero and infinite Ohms.

NOTE: You MUST use a high quality (10 megohm impedance or more) DVOM for these tests. Be sure to follow the positive and negative lead instructions exactly as given.