LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1994 >> Sentra (2 Door) L4-1597cc 1.6L DOHC MFI (GA16DE) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Rear Crankshaft Main Bearing Seal >> Service and Repair

Rear Crankshaft Main Bearing Seal: Service and Repair





Rear Oil Seal
1. Remove flywheel or drive plate.
2. Remove rear oil seal retainer.
3. Remove traces of liquid gasket using scraper.
4. Remove seal from rear oil seal retainer.

Caution: Be careful not to scratch rear oil seal retainer.





- Install new oil seal in the direction shown.





5. Apply new engine oil to new oil seal and install it using a suitable tool.
scientia non olet · About LEMON Manuals