Malfunction Indicator Lamp (MIL)

A Malfunction Indicator Lamp have been adopted to indicate system malfunctions. These lights come on under the following conditions:

1) When ignition switch is turned "ON" (for bulb check).
2) When systems related to emission performance malfunction in Diagnostic Test Mode I (with engine running).

^ The Malfunction Indicator Lamp always illuminates and is synchronous with red LED.




3) When a malfunction is detected regarding the self-diagnostic items.

^ The malfunction indicator lamp will turn off when normal operation is resumed. Diagnostic Test Mode III memory must be cleared as the contents remain stored.

4) When camshaft position sensor or CPU of ECM malfunctions and fail-safe system operates during engine rotation.