LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1994 >> D21 Hardbody 2WD V6-2960cc 3.0L SOHC MFI (VG30E) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Knock Sensor >> Testing and Inspection

Knock Sensor: Testing and Inspection




1. Disconnect knock sensor sub-harness connector.
2. Check continuity between terminals [e] and ground.

Continuity should exist.

scientia non olet · About LEMON Manuals