EGR Backpressure Transducer: Testing and Inspection
1. Plug one of two ports of EGRC-BPT valve.
2. Apply a pressure above 0.490 kPa (50 mmH2O, 1.97 inH2O) to check for leakage. If a leak is noted, replace valve.
1. Plug one of two ports of EGRC-BPT valve.
2. Apply a pressure above 0.490 kPa (50 mmH2O, 1.97 inH2O) to check for leakage. If a leak is noted, replace valve.