Alignment

Caster Angle, Deg.:
Limits - 2/5 to +1 1/10
Desired + 11/30

Camber Angle, Deg.:
Limits - 1/3 to +1 1/6
Desired + 5/12

Kingpin Inclination, Deg. 8 1/3 to 9 5/6
Toe-In, Inch [01] +.04 to +.02
Toe-Out On Turns, Deg. [02]:
Inner Wheel 36 to 38
Outer Wheel 33 to 35

Ball Joint Wear [05]

[02] -- Measure w/wheels @ full lefthand & righthand turn positions.

[05] -- Refer to Ball Joint, Lower.