LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1992 >> Sentra SE-R >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Steering Wheel & Horn Pad >> Removal (Pathfinder, Pickup, Stanza & 240SX)

Removal (Pathfinder, Pickup, Stanza & 240SX)

  1. Disconnect battery ground cable. Remove screws attaching horn button assembly/center pad to steering wheel from behind steering wheel.
  2. Pull horn button assembly/center pad from steering wheel. Use a cloth-covered screwdriver to pry off horn button assembly/center pad (if necessary). Disassemble horn button assembly (if necessary).
  3. Place springs, contacts, horn or cruise control harness connectors (if equipped) and screws in order for reassembly reference. Place wheels in straight-ahead position.
  4. Remove steering wheel nut and washer. Mark steering wheel and shaft for reassembly reference. Using a steering wheel puller, remove steering wheel.
  5. Place steering wheel, cruise control switch (if equipped), canceling cams, springs and slip rings in order for reassembly reference.
scientia non olet · About LEMON Manuals