Canister Purge Solenoid: Description and Operation

Vacuum Control Solenoid:

PURPOSE

The Canister Purge Solenoid will either allow vacuum to pass to the Purge Control Valve or vent the vacuum based on signals from the ECM. The Canister Purge Solenoid also functions as the EGR Control Solenoid.


LOCATION

On the Intake Manifold, near the EGR Valve.


OPERATION

The Canister Purge Solenoid has two modes; it is either energized by the ECM and vents vacuum or it is de-energized and allows vacuum to pass to the Purge Control Valve on the Evaporative Canister.

The Purge Solenoid is ENERGIZED (vents vacuum) when:
^ Engine RPM is less than 800
^ Engine RPM is more than 5200
^ Engine coolant temperature is below 60° C (140° F)
^ Vehicle speed is less than 11 mph (18 km/h)

The Purge Solenoid is DE-ENERGIZED (allows vacuum) when:
^ Any other condition other than above.