Shift Control Components - Disassembly

SHIFT CONTROL COMPONENTS - Disassembly




1. Mount adapter plate on vise.

2. Remove O.D. & reverse fork rod.




3. Remove check ball plug, check ball and return spring.




4. Drive out retaining pin from striking lever.

5. While pulling out striking rod, remove striking lever and striking interlock. Then remove 1st & 2nd, 3rd & 4th and reverse shift forks.




6. Drive out retaining pin from O.D. shift fork.

7. Pull out O.D. fork rod and then remove O.D. shift fork.