LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1989 >> Sentra Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Power Brake Unit >> Removal

Power Brake Unit: Removal

  1. Disconnect power unit push rod from brake pedal by removing clevis pin. Disconnect hydraulic lines from master cylinder and vacuum line from power brake unit.
  2. Remove master cylinder mounting nuts and master cylinder. Remove nuts attaching power brake unit to firewall. Remove power brake unit.
NOTE: Output rod on Sentra and Stanza is nonadjustable.
scientia non olet · About LEMON Manuals