LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1989 >> Sentra Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Rotor >> Removal (2WD Pathfinder & Pickup)

Removal (2WD Pathfinder & Pickup)

  1. With caliper removed, remove hub dust cap, "O" ring, cotter pin, adjusting cap and lock nut. Remove hub and rotor assembly from spindle without dropping outer bearing and washer.
  2. Remove washer, outer bearing, inner grease seal, inner wheel bearing and bolts attaching hub to rotor. Separate hub from rotor.
NOTE: Avoid damaging dust cap "O" ring while removing hub dust cap.
scientia non olet · About LEMON Manuals